Planet IGS-4215-4P4T2S 8xGiga @ 4xPoE+, 2x SFP -40...+75C Industrial Switch SNMP

Planet IGS-4215-4P4T2S 8xGiga @ 4xPoE+, 2x SFP -40...+75C Industrial Switch SNMP
Toimitettavissa:3 kpl

Toimitusaika:1-3 vrk
Varastotiedot päiv.:6.6.2024

502.20 €
PLANET IGS-4215-4P4T2S on teollisuuskäyttöön ssuunniteltu 10-porttinen hallittava 10/100/1000 PoE+ Ethernet-kytkin laajennetulla käyttölämpötila-alueella
sekä DIN-kiskokiinnityksellä. Kytkin on varustettu 8x 10/100/1000Base-T kupariporteilla, joista 4x on varustettu PoE+ virransyöttötuella. Kytkimessä on lisäksi 2x Gigabitin SFP-modulipaikkaa.

Kytkin on varustettu "PD keep-alive" ominaisuudella, jolla kytkin pystyy itsenäisesti tarkistamaan esim. IP-kameran tilan ping-komennolla ja tekemään portille automaattisen virtakäynnistyksen (PoE OFF -> PoE ON).
Physical Port
8x 10/100/1000BASE-T Gigabit RJ45 copper with 4-port
2x 100/1000BASE-X mini-GBIC/SFP slots, SFP type auto detection
IEEE 802.3at/af PoE Injector (Port-1 to Port-4) RJ45 console interface for switch basic management and setup
Complies with IEEE 802.3at Power over Ethernet Plus, end- span PSE
Backward compatible with IEEE 802.3af Power over Ethernet
Up to 4 ports of IEEE 802.3af/802.3at devices powered
Supports PoE power up to 36 watts for each PoE port
Auto detects powered device (PD)
Circuit protection prevents power interference between ports
Remote power feeding up to 100 meters
PoE management
- Total PoE power budget control
- Per port PoE function enable/disable
- PoE port power feeding priority
- Per PoE port power limitation
- PD classification detection
- PD alive-check
- PoE schedule
IP30 aluminum case
DIN-rail and wall-mounted design
Supports -40...+75C operating temperature
Supports ESD 6KV DC Ethernet protection
Redundant power design
- 48...56VDC wide power input
Hardware based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-negotiation and auto MDI/MDI-X
Features Store-and-Forward mode with wire-speed filtering and forwarding rates
IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
8K MAC address table size
10K jumbo frame
Automatic address learning and address aging
Supports CSMA/CD protocol
Supports VLAN
- IEEE 802.1Q tagged VLAN
- Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support
- Protocol VLAN
- Voice VLAN
- Private VLAN (Protected port)
- Management VLAN
Supports Spanning Tree Protocol
- STP (Spanning Tree Protocol)
- RSTP (Rapid Spanning Tree Protocol)
- MSTP (Multiple Spanning Tree Protocol)
- STP BPDU Guard, BPDU Filtering and BPDU Forwarding
Supports Link Aggregation
- IEEE 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum 4 trunk groups, up to 4 ports per trunk group
Provides port mirror (many-to-1)
Loop protection to avoid broadcast loops
Ingress/Egress Rate Limit per port bandwidth control
Traffic classification
- IEEE 802.1p CoS
- TOS/DSCP/IP precedence of IPv4/IPv6 packets
Strict priority and Weighted Round Robin (WRR) CoS policies
Supports IPv4 IGMP snooping v2, v3
Supports IPv6 MLD snooping v1, v2
IGMP querier mode support
IGMP snooping port filtering
MLD snooping port filtering
Storm Control support
- Broadcast/unknown unicast/unknown multicast
- IEEE 802.1X port-based network access authentication
- Built-in RADIUS client to cooperate with the RADIUS servers
- DHCP Option 82
- RADIUS/TACACS+ authentication
Access Control List
- IPv4/IPv6 IP-based ACL
- IPv4/IPv6 IP-based ACE
- MAC-based ACL
- MAC-based ACE
MAC Security
- Static MAC
- MAC filtering
Port security for source MAC address entries filtering
DHCP snooping to filter distrusted DHCP messages
Dynamic ARP inspection discards ARP packets with invalid MAC address to IP address binding
IP source guard prevents IP spoofing attacks
DoS attack prevention
IPv4 and IPv6 dual stack management
Switch Management Interface
- IPv4/IPv6 Web switch management
- Console and telnet Command Line Interface
- SNMP v1, v2c, v3
- SSH and SSL secure access
User privilege levels control
Built-in Trivial File Transfer Protocol (TFTP) client
Static and DHCP for IP address assignment
System Maintenance
- Firmware upload/download via HTTP/TFTP
- Configuration upload/download through HTTP/TFTP
- Hardware reset button for system reboot or reset to factory default
- Dual images
SNTP Network Time Protocol
Cable diagnostics
Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
SNMP trap for interface Link Up and Link Down notification
Event message logging to remote syslog server
Four RMON groups (history, statistics, alarms and events)
PLANET Smart Discovery Utility
Valmistajan koodi:IGS-4215-4P4T2S
Tukkurin koodi:PLANET-IGS-4215-4P4T2S
Takuu:24 kk
Oma koodi:120644
Tuote päivitetty:12.2.2016
Tuote lisätty:12.2.2016
TuotesivuEsite Pdf.Pikaopas Pdf.Käyttöopas Pdf. Uk.Kysy lisätietoja